|
|
DM Introduced:
195x
|
|
The DM Point Light Source heads were created to provide high intensity light
sources for special applications such as microfilm, engineering drawings,
electron microscope negatives, Ektalith printing, etc. Three different heads
were available to accommodate different focal length lenses, and a custom
condenser set was required for each focal length. A variable transformer power
supply was necessary since the enlarging lens was required to be at maximum
opening at all times to prevent colour fringing. The lamp could be
adjusted vertically to ensure even light distribution at different magnifications.
Using the special BEV lamp, the DM was able to provide up to 60 times the light
output of a conventional condenser lamphouse.
It was most often sold with D2, D3, and later, D5 chassis as Omega DM Microfilm Enlargers. Used Advice: The DM lamphouse is not intended for normal photographic printing, but is useful for high contrast work. One should ensure that a used lamphouse is the correct type and has the correct condenser set for the intended format. If in doubt, call us for additional information. |
|
|
| 407-811 | DM Lamphouse "A" for 25mm and 28mm lenses | D |
| 407-812 | DM Lamphouse "B" for 35mm to 105mm lenses | D |
| 407-813 | DM Lamphouse "C" for 135mm to 150mm lenses | D |
| 429-120 | Adapter Kit to attach DM Lamphouse to D5/D6 chassis | D |
| 472-032 | Special DM Condenser set for 35mm lens (higher light output) | D |
| 472-034 | Condenser set for 105mm lens | D |
| 472-035 | Special DM Condenser set for 25/28mm lens (higher light output) | D |
| 472-036 | Condenser set for 35mm lens | D |
| 472-037 | Condenser set for 50mm lens | D |
| 472-039 | Condenser set for 60mm lens | D |
| 472-040 | Condenser set for 75/80mm lens | D |
| 472-041 | Condenser set for 25/28mm lens | D |
| 472-042 | Condenser set for 90mm lens | D |
| 472-043 | Condenser set for 135/150/161mm lens | D |