D Condenser Lamphouse - "colorhead" model

This was referred to as the "Colorhead" lamphouse because it was the first version able to accept filters for color printing above the lens. The main body section was a new casting that had a door in the front. The user installed a 5" diameter piece of heat absorbing glass in the upper portion of the main body, and the color printing filters, in an accessory filter holder, were inserted into the front slot. Unfortunately, the specified size for the filters was 6³/8"x6¾" requiring that they be cut down from a larger sheet, which was rather inconvenient and expensive.

This was an option for the Omega DII enlarger, and at the time there were still three accessory condenser sets for lenses shorter than 135mm.

Used Advice: If the accessory condenser sets are missing or damaged, this lamphouse can also be converted to DV specification using the conversion kit. The original filter holder is no longer available, but a suitable replacement can be fashioned if required.

**Lamphouse**
7401	Omega D Series "Colorhead" Attachment	D

**Accessories**
7423	DV Conversion Kit (converts lamphouse to DV) (replaced by 404-852)	C
4400	3½" Double Condenser set for 50-60mm lenses (later #472-021)	D
4401	4½" Double Condenser set for 75-80mm lenses (replaced by 4406)	D
4406	4¹¹/16" Double Condenser set for 75-105mm lenses (later #472-022)	D
4402	5" Double Condenser set for 90-105mm lenses (replaced by 4406)	D
4403	6½" Double Condenser set for 135-150mm lenses (repl.) (later#472-023)	C
4411	Single Condenser 3½" dia. (later #472-102)	DL
4412	Single Condenser 4½" dia.	D
4213	Single Condenser 4¹¹/16" dia. (later #472-103)	D
4414	Single Condenser 5" dia.	D
4415	Single Condenser 6½" dia. (later #472-106)	C
7411	Heat Absorbing Glass 5" dia. (later #473-105)	DL
7402	Filter Holder	D

**Lamps**
6401	211-type 75w/120v (later #471-002)	C
6402	212-type 150w/120v (later #471-003)	C