Omega D2

Omega D2
4"x5" Enlarger

Introduced: 1955
Discontinued: 1979

D2/C-XL Condenser Enlarger

Although based on the older Omega DII and sharing a number of parts with it, the D2 enlarger had quite a few improvements that distinguish it from its predecessor. There was a new casting for the base, and longer, heavier chassis rails. The counter balance springs were mounted at the top of the column instead of on the carriage. But the most significant difference was the rack and pinion elevation mechanism that replaced the "lift and lock" system on the DII.

Through its long production run, there were a variety of different heads fitted to the D2, and several variants on the basic model.

Although it was effectively discontinued in 1975 when the D5 was introduced, there was one last production run in 1977. It remains popular on the used equipment market since it was solidly built and most of the major parts for it are still available.

Used Advice: The chassis system of the D2 is very robust and fully serviceable, but check for signs of heavy usage which might indicate some parts will need replacement. Examine condenser lamphouses to ensure that all components are present and in good condition.

**Enlargers**
404-002	D2/C Double Condenser Enlarger	D
404-006	D2/CXL Double Condenser Enlarger	D
404-004	D2/O Omegalite Enlarger	D
404-008	D2/OXL Omegalite Enlarger	D
404-051	D2V Variable Condenser Enlarger	D
404-052	D2VXL Variable Condenser Enlarger	D
404-207	Super Chromega D2XL Enlarger (with 404-026)	D
404-013	Super Chromega D2 Dichroic Enlarger (with 404-830)	D
404-015	Super Chromega D2XL Dichroic Enlarger (with 404-830)	D
404-017	Super Chromega II D2 Dichroic Enlarger	D
404-019	Super Chromega II D2XL Dichroic Enlarger	D
404-071	D2V Condenser Enlarger (1977)	D
404-074	Chromega D2 Dichroic II Enlarger (1977)	D
404-076	Chromega D2 Dichroic II Enlarger with Chromegatrol (1977)	D

**Major Components**
404-001	D2 Chassis for condenser lamphouse	D
404-005	D2XL Chassis for condenser lamphouse	D
404-012	D2 Chassis for dichroic lamphouse	D
404-014	D2XL Chassis for dichroic lamphouse	D
404-801	D Double Condenser Lamphouse	D
404-803	Omegalite Diffused Cold Light Lamphouse	D
404-804	DV Variable Condenser Lamphouse	O
404-809	Chromega D Lamphouse	D
404-826	Super Chromega D Lamphouse with power supply	D
404-830	Super Chromega D Dichroic Lamphouse with power supply	DR
404-832	Super Chromega D Dichroic II Lamphouse with power supply	O
404-834	Super Chromega D Dichroic II Lamphouse w/o power supply	C
412-021	Standard Power Supply for dichroic lamphouse	C
404-841	Solid State Plug-in Voltage Stabilizer for 412-021	C
412-040	Chromegatrol - combination stabilized power supply and timer	DR

**Negative Carriers**
Two Piece Sandwich Type
423-301	Disc format	DL
423-302	16mm format (5/16"x7/16")	D
423-303	Minox format	D
423-300	110 format	D
423-306	126 Instamatic format (old style)	D
423-353	126 Instamatic format	C
423-304	35mm Half Frame format	D
423-305	35mm Full Frame (old style)	D
423-352	35mm Full Frame	C
423-399	Hasselblad Xpan format (25x65mm)	K
423-307	4x4cm (127 format) (old style)	D
423-354	4x4cm (127 format)	DL
423-319	6x4.5cm (2-¼"x1-5/8")	C
423-308	2¼"x2¼" (6x6cm) (old style)	D
423-355	2¼"x2¼" (6x6cm)	C
423-309	2¼"x2¾" (6x7cm) (old style)	D
423-356	2¼"x2¾" (6x7cm)	C
423-310	Linhof Ideal 120 (old style)	D
423-357	Linhof Ideal 120	D
423-311	Linhof Ideal 70mm (old style)	D
423-358	Linhof Ideal 70mm	D
423-312	2¼"x3¼" roll film (6x9cm) (old style)	D
423-360	2¼"x3¼" roll film (6x9cm)	C
423-313	2¼"x3¼" sheet film (6x9cm) (old style)	D
423-361	2¼"x3¼" sheet film (6x9cm)	C
423-315	3¼"x4¼" sheet film	D
423-364	Polaroid 105 format	DL
423-314	9x12cm format (old style)	D
423-362	9x12cm format	C
423-316	4"x5" sheet film (old style)	D
423-363	4"x5" sheet film	C
423-317	4"x5" pack film	DL
423-359	4"x5" Glass Carrier	C

Transparency Carriers
423-371	Mounted 35mm Transparency	C
423-372	Unmounted 35mm Transparency with slot for gray scale	D

Spring Hinged, Rapid Shift, Glassless
423-342	35mm Half Frame	DL
423-343	35mm Full Frame	DL
423-344	126 Instamatic	DL
423-345	2¼"x2¼" (6x6cm)	D
423-346	2¼"x2¾" (6x7cm)	DL
423-347	Linhof Ideal 120	D
423-348	Linhof Ideal 70mm	D
423-349	2¼"x3¼" roll film (6x9cm)	D
423-350	9x12cm	D

Spring Hinged, Rapid Shift, Glass
423-322	35mm Full Frame	DL
423-323	2¼"x2¼" (6x6cm)	DL
423-324	2¼"x3¼" roll film (6x9cm)	DL
423-325	2¼"x3¼" sheet film (6x9cm)	D
423-326	9x12cm format	D
423-327	4"x5" sheet film	D

Carrier for 4"x5" Color Separations
423-377	2-Pin Registration Carrier for 4"x5" Color Separations (not for dichroic)	D

100' Spool Carriers
423-373	100' Spool Glassless Rapid Shift (custom order, sized as specified)	D
423-374	100' Spool Glass Rapid Shift (custom order, sized as specified)	D

Electron Microscope Plate Carrier
423-376	Carrier for 2"x10" Electron Microscope Plates	D

For Distortion Correction Attachment (429-080)
423-902	35mm	D
423-903	2¼"x2¼" (6x6cm)	D
423-904	2¼"x3¼" roll film (6x9cm)	D
423-905	4"x5"	D

Glass Plate Carriers
423-380	6.5x9cm	D
423-381	9x12cm	D
423-382	3¼"x4"	D
423-383	3¼"x4¼"	D
423-384	4"x5"	D

Anti Newton Glass
473-098	4"x5" for 423-327, pair	O
473-099	4"x5" for 423-359, pair	O
473-427	Top glass only for 423-327 and 423-359	C

Scratch Suppression Carrier
7265	Refractamatic Negative Carrier w/Refractasil	D
7266	Refractasil 4 oz. Bottle (later 479-001)	D

**Lens Mounts**
421-021	Flat Mount with recessed cup (for 39mm threaded Leica camera lenses)	C
421-100	Flat Mount only for 50-105mm lenses (requires lens disc)	C
421-101	Lens Cone 2¾" (for 135mm lenses)	DL
421-102	Lens Cone 4½" (for 150mm lenses)	D
421-025	Recessed Mount for 25mm Omegaron	D
421-026	Recessed Mount for 35mm Omegaron	D
421-027	Recessed Mount for 28mm Componon	D

**Lens Discs**
421-000	Blank Lens Disc	C
421-001	Flat Lens Disc with 39mm hole	C
421-002	Flat Lens Disc with 32.5mm hole	C
421-003	Flat Lens Disc with 25mm hole	DL
421-008	Flat Lens Disc with 50mm hole	C
421-013	Flat Lens Disc with 39mm threaded flange	C
421-022	Flat Lens Disc with 42mm hole	C
421-054	Flat Lens Disc with 52mm hole	C
421-055	Flat Lens Disc with 62mm hole	DL
421-010	39mm Leica thread Lock Ring	C
421-014	50mm threaded Lock Ring	DL

Accessories

404-851

DV Conversion Kit (converts old style condenser enlarger to DV)

404-852

DV Conversion Kit (converts old style condenser enlarger to DV)

407-035

Xenomega Pulse Xenon Arc unit 190-250v (for condenser head)

407-055

Omni-Con Variable Contrast Light Source (for condenser head)

407-056

Filter Frame with Polycontrast Filters for 407-055 (replacement)

407-057

Filter Frame with Varigam Filters for 407-055 (replacement)

412-001

Power Lift for D2/D3/D4/D6 Enlargers

412-010

Power Focus for D2/D3/D4

412-020

Exhaust Cooling Blower (for condenser head using PH213 lamp)

413-001

Heavy Duty Floor Stand with 24"x32" Drop Table

413-002

Professional Enlarging Table 30"x40" (current as 429-903)

429-003

Red Safety Filter (early type with mounting post)

429-004

Red Safety Filter (use with 429-029)

429-013

Portrait Diffusion Grid (early type with mounting post)

429-015

Portrait Diffusion Grid (use with 429-029)

429-021

3-Color Filter Holder (for additive color printing or separations)

429-023

Filter Holder for Variable Contrast filters

429-025

Infrared Interference Rejecting Filter No. 251

429-029

Under Lens Filter Holder for red and variable contrast filters

429-052

DV Filter Holder (for DV lamphouse - accepts 5" square filters)

429-070

Wall Projection Attachment (for mural size enlargements)

429-071

Microphotography Attachment

429-076

Reflex Copying Attachment

Micromega Dual Range Focus Kit

429-080

Distortion Correction Attachment (see carrier section for carriers)

429-082

Masking Attachment for Omegalite model

429-083

Masking Attachment for condenser models

429-085

Auxiliary Focus Attachment (for small enlargements and reductions)

429-088

Copy Lights, 4 lamp set

429-089

Target Projection Copy Attachment

429-092

Heavy Duty Wall Mount (should be used with 429-095 or 429-097)

429-095

Heavy Duty Wall Brace

429-097

Heavy Duty Wall Brace (later type)

429-099

Flexible Focusing Shaft Extension for XL models

429-101

Magnification Reference Scale for 50/75mm lenses

429-102

Magnification Reference Scale for 90/135mm lenses

429-110

Mounting Kit for fitting later 404-818 DV lamphouse to dichroic chassis

429-112

Mounting Kit adapts D2 enlargers to accept dichroic lamphouse

429-116

Retrofit Lever Kit updates older dichroic enlargers to improved lifting levers

429-127

Adapter Kit for fitting 404-826 Chromega lamphouse to D2 chassis

429-128

Adapter Kit for fitting 404-826 lamphouse to D6 or D2 chassis

429-146

Light Integrating Sphere Type DB (2¼"x 2¾") (for 404-826)

429-147

Light Integrating Sphere Type DA (35mm) (for 404-826)

429-177

DB Type (6x7cm) Mixing Chamber for dichroic lamphouse

DA Type (35mm) Mixing Chamber for dichroic lamphouse

429-200

One Piece 0-180 Filter - Cyan for 404-826 lamphouse

429-201

One Piece 0-180 Filter - Magenta for 404-826 lamphouse

429-202

One Piece 0-180 Filter - Yellow for 404-826 lamphouse

429-204

One Piece Filter Conversion Kit for Super Chromega up to #295957

461-058

Footswitch for Chromegatrol

472-021

3½" Double Condenser set for 50-60mm lenses (for 404-801)

472-022

4-¹¹/16" Double Condenser set for 75-105mm lenses (for 404-801)

472-023

6½" Double Condenser set for 135-150mm lenses (standard for 404-801)

472-102

Single Condenser 3½" dia.

472-103

Single Condenser 4¹¹/16" dia.

472-104

Single Condenser 4¹¹/16" dia., unmounted for DV lamphouse

472-105

Single Condenser 4¹¹/16" dia., mounted for DV lamphouse

472-106

Single Condenser 6½" dia.

473-001

Opal Glass, rectangular for DV Condenser Lamphouse

473-003

Opal Glass 4¾" dia.

473-004

Opal Glass 6½" dia.

473-005

Opal Glass for DV Condenser Lamphouse

473-013

Ground Glass 4¾" dia.

473-014

Ground Glass 6½" dia.

473-015

Ground Glass, rectangular for DV Condenser Lamphouse

473-102

Tri-sected Heat Absorbing Glass 2-¹¹/32" for 404-809 lamphouse

473-103

Heat Absorbing Glass for DV Condenser Lamphouse

473-104

Heat Absorbing Glass 4¾" dia.

473-105

Heat Absorbing Glass 5" dia.

473-106

Heat Absorbing Glass 6½" dia.

473-108

Tri-sected Heat Absorbing Glass 2-³/8" for Halogen lamphouse

473-109

Tri-sected Heat Absorbing Glass 2¾" for 404-826 lamphouse

479-012

Dust Cover for standard D enlargers

479-013

Dust Cover for XL models

479-027

Enlarger Alignment Tool

**Lamps**
471-002	211-type 75w/120v for condenser lamphouse	C
471-003	212-type 150w/120v for condenser lamphouse	C
471-011	Circline Lamp 8¼" 115v/22w, white, for Omegalite lamphouse	C*
471-012	Circline Lamp 8¼" 115v/22w, blue, for Omegalite lamphouse	C*
471-021	No. 100T8/1 SC 20v, 100w for early Chromega lamphouse	C
471-027	Tungsten Halogen 150w/24v for 404-826 Chromega lamphouse	C
471-029	Quartz Halogen 250w/22.5v for dichroic lamphouse	C
471-031	Panel Lamp 6w/120v for dichroic lamphouse	C
471-036	PXA Xenon Lamp assembly for 407-035 Xenomega light source	C*
*no longer supplied by Omega - available from other sources

**Common Service Parts**
9-112-0054-02	Counterbalance Spring assembly (2 req'd)	C
9-103-0173-01	Elevation Gear with set screw (2 req'd)	C
9-201-0003-01	Elevation Brake Block (use 9-201-0263-02)	DR
9-103-0280-03	Brake Block Knob assembly - original metal type	DL
9-103-0280-04	Brake Block Knob assembly - later D5 nylon type	C
9-261-0014-02	Focus Rod, brass (2 req'd)	C
9-103-0658	Left Lensboard Holder Assembly with screw	D
9-103-0657	Right Lensboard Holder Assembly with screw	D
9-251-0325-01	Lensboard Holder Thumb Screw (2 req'd)	DL
9-311-0244-02	Column Mounting Base Plate	C
9-111-0238-02	Base Plate Rim Clamp (3 req'd)	C
9-151-0217-01	Base Plate Rim Clamp Spacer Sleeve (3 req'd)	C
9-151-2717	Base Plate Rim Clamp Mounting Bolt (3 req'd)	C
9-035-4520-29	Elevation Crank Arm Knob	C
9-151-0224-01	Crank Arm Knob Mounting Screw	C