|
|
Introduced:
1962 |
|
The B22 was perhaps the most popular of all the Omega medium format enlargers.
It had a long production run and thousands of them were sold to schools, clubs,
other institutions and home darkroom enthusiasts due to their solid design and
construction, and reasonable price. The column, offered in standard and XL
length, was a box aluminum extrusion with the counterbalance spring mounted on the top of the
column. The condenser head
followed
the design of other Omega products of the time.
The B22 was not sold in component form since, until the last few months of its production, the condenser lamphouse was the only head available for that chassis. Early in 1974 the Chromega B Dichroic Lamphouse was introduced on the B22 as the Chromega B22 Dichroic Enlarger, but within a few months the B22 was replaced by the new B66. Since the Chromega B Dichroic head was designed to fit the B22, it was a popular retrofit. At the same time that the Chromega B Dichroic head debuted, the existing series of B22 negative carriers were discontinued. The older 35mm carrier for the B22 would not work with the colorhead unless the vertical pins were removed. The new set of carriers were spring-hinged, rapid shift design, with black bottom plates, and became the standard carriers for the B66, B600 and B635, and are listed with those enlargers. The same carriers are still in production for the C700 enlarger. The B22 was frequently sold as a kit with lenses and negative carriers. Kits with 35mm carriers and 50mm lenses also included the supplementary condenser. Late production B22 columns were finished in black. Used Advice: A very popular model on the used market as all common parts are available new or used, and the enlarger is easily serviced. |
|
|
| Enlargers | Major Components | Neg. Carriers | Lens Mounts | Accessories | Lamps | Parts |
|
|
| 402-002 | B-22 Condenser Enlarger | D |
| 402-003 | B-22XL Condenser Enlarger | D |
| 402-025 | Chromega B-22 Dichroic Enlarger | D |
| 402-026 | Chromega B-22 XL Dichroic Enlarger | D |
| 423-102 | Minox format (replaced by 423-115) | DR |
| 423-109 | 110 Pocket Instamatic (replaced by 423-122) | DR |
| 423-103 | 35mm single frame (half frame) | D |
| 423-104 | 35mm (full frame) (replaced by 423-117) | DR |
| 423-105 | 126 Instamatic (replaced by 423-118) | DR |
| 423-106 | 4x4cm (127 format) | D |
| 423-107 | 2¼"x2¼" (6x6cm) (replaced by 423-120) | DR |
| 423-110 |
Mounted 35mm Transparency (replaced by 423-123) |
DR |
|
423-111 |
Unmounted 35mm Transparency |
D |
| 421-005 | Blank Lens Disc | DL |
| 421-006 | Recessed Lens Mount - 32.5mm hole | D |
| 421-007 | Recessed Lens Mount - 25mm hole | D |
| 421-016 | Lens Disc - 32.5mm hole | D |
| 421-017 | Lens Disc - 39mm hole | C |
| 421-019 | Lens Disc - 25mm hole | DL |
| 421-020 | Lens Disc with 39mm threaded flange | C |
| 421-010 | 39mm Leica thread Lock Ring | C |
| 471-001 | Lamp No. 111A 75w/125v for condenser lamphouse | C |
| 471-043 | Quartz Halogen Lamp 75w/27v for 402-019 dichroic lamphouse | C |
|
9-161-0049 |
Brass Focus Rod |
DL |
| 9-111-1425-01 | Elevation Lock Friction Pad | DL |
| 9-111-1425-03 | Elevation Lock Anchor Plate | DL |
| 9-111-1425-04 | Elevation Lock Threaded Anchor Plate | DL |
| 9-151-1410-05 | Elevation Locking Knob | DL |
| 9-203-0016 | Power Cable with Switch, Plug and Socket | DL |
| 9-151-0081-01 | Knurled Screw (lensmount and lamp cap to condenser assembly) | C |
| 9-103-0318-02 | Filter Drawer | DL |
| 9-111-4036-02 | Upper Frame for Filter Drawer | DL |
| 9-103-1403 | Counterbalance Spring | DL |
| Copyright © 2002-2007 KHB Photografix. | ||