Arkay

 Fiber Base Print Dryers

Arkay provides Drum Dryers for volume processing of fiber base photo papers, and stabilization and stat prints, as well as two-sided flat bed dryers.
Arkay 150 Dual Dri Drum Dryer
ST-22 Stat-Dri
For stabilization and stat prints to 21" wide.
- over 300 8"x10" stat prints per hour
- Teflon coated stainless steel drum
- variable speed and temperature controls
- temperature range to 250°F
- apron speed from 5" to 40" per minute
- automatic cool down/stop control
- baked-on enamel finish
- 115 VAC, 60 Hz, 9.2 amps
- 3700 BTU/hr. maximum
- shipping weight 200 lbs.
150 Dual-Dri
For fiber base prints up to 21" wide 
- highly polished stainless steel drum
- variable speed and temperature controls
- temperature range to 250°F
- apron speed from 1.5" to 12" per minute
- up to 80 SW 8"x10" B&W prints per hour
- automatic cool down/stop control
- tension lever for squeegee roller
- tracking adjustment for apron
- baked enamel external finish
- 115 VAC, 60 Hz, 9.2 amps
- 3700 BTU/hr. maximum
- shipping weight 200 lbs.
Arkay ST-22 Stat-Dri Drum Dryer

       Optional Dryer Accessories

- Stepdown Transformer, 230VAC 50/60 HZ

Arkay

 Flat Bed Print Dryers

Arkay Flat Bed Dryers are dual sided to provide maximum capacity in minimum space.
T2C
For prints up to 11"x14"
- twin 12"x17" drying surfaces
- dries up to eight 4"x5" prints per side
- temperature range to 195°F
- 115 VAC, 60 Hz, 3 amps
- shipping weight 13 lbs.
 
Also Available

Ferrotype Plates

In 10"x14", 12"x17", and 19x24" sizes

Home
 

© 2004 - 2010  KHB Photografix, an authorized Arkay dealer and service facility.
The Arkay trademarks and logos are property of Regal Photo Products, Inc. All rights reserved.